SMA3102 no. a1825-1/5 features ? high gain : gp=24.5db typ. @1.575ghz ? low noise : nf=1.5db typ. @1.575ghz ? low voltage : v cc =2.0v typ. ? low current : i cc =10ma typ. ? halogen free compliance speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit supply voltage v cc 3.5 v circuit current i cc 40 ma allowable power dissipation p d 280 mw operating temperature topr --40 to +85 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7022a-018 90810am tk im tc-00002467 sanyo semiconductors data sheet SMA3102 silicon mmic low noise ampli er http://semicon.sanyo.com/en/network ordering number : ena1825 product & package information ? package : mcph6 ? jeita, jedec : sc82, sc82a, sc88 ? minimum packing quantity : 3,000pcs/reel type of taping: tl marking 1 : vcc 2 : gnd 3 : out 4 : gnd 5 : gnd 6 : in sanyo : mcph6 2.0 0.25 1.6 2.1 0.25 0.85 0.3 0.65 0.15 0 to 0.02 0.07 654 123 654 123 lb lot no. lot no. tl www.datasheet.co.kr datasheet pdf - http://www..net/
SMA3102 no. a1825-2/5 recommended operating conditions at ta=25c parameter symbol conditions ratings unit min typ max supply voltage v cc 1.8 2 2.3 v operating ambient temperature topr --40 +25 +85 c electrical characteristics at ta=25c, v cc =2.0v parameter symbol conditions ratings unit min typ max circuit current i cc 7.0 10.0 14.0 ma power gain gp f=1.575ghz 21.5 24.5 27.5 db isolation isl f=1.575ghz 33.0 38.0 db input return loss rlin f=1.575ghz 8.0 10.0 db output return loss rlout f=1.575ghz 12.0 16.0 db noise figure nf f=1.575ghz 1.5 1.7 db gain 1db compression input power pin(1db) f=1.575ghz --25.0 --22.0 dbm input 3rd order intercept point iip3 f1=1.574ghz, f2=1.575ghz --10.0 dbm note) pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopt ed. test circuit 6pf 12pf 1000pf in v cc out 8.2nh connect 2, 4 and 5 with gnd. 12 65 3 4 it15925 10nh www.datasheet.co.kr datasheet pdf - http://www..net/
SMA3102 no. a1825-3/5 design of the evaluation board symbol value c1 12pf c2 6pf c3 1000pf l1 10nh l2 8.2nh v cc in out c2 l1 c3 c1 l2 input return loss, rlin -- db frequency, f -- ghz rlin -- f gp -- f frequency, f -- ghz power gain , gp -- db i cc -- v cc circuit voltage, v cc -- v circuit current, i cc -- ma it15928 0.5 1.0 1.5 2.0 2.5 --25 --30 --10 0 --15 -- 5 --20 it15926 0 0 5 10 15 20 25 123 it15927 0.5 5 10 15 20 25 40 35 30 1.0 1.5 2.0 2.5 www.datasheet.co.kr datasheet pdf - http://www..net/
SMA3102 no. a1825-4/5 isolation, isl -- db noise figure, nf -- db output return loss, rlout -- db frequency, f -- ghz frequency, f -- ghz frequency, f -- ghz rlout -- f isl -- f nf -- f output level, pout -- dbm input level, pin -- dbm pout -- pin it15931 1.0 1.5 2.0 2.5 0.5 1.5 2.0 2.5 3.0 3.5 1.0 0.5 -- 5 0 5 10 --10 --20 --15 it15929 it15930 0.5 --40 --10 --20 --30 --70 --60 --50 1.0 1.5 2.0 2.5 0.5 1.0 1.5 2.0 2.5 it15932 --40 --30 --20 --10 0 --50 f=1.575ghz --25 --30 --10 0 --15 -- 5 --20 www.datasheet.co.kr datasheet pdf - http://www..net/
SMA3102 no. a1825-5/5 ps this catalog provides information as of september, 2010. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. www.datasheet.co.kr datasheet pdf - http://www..net/
|
